AMICO Grating
 
Bar Grating Products

Bar Grating Info

 

upport

 

Swage Locked Bar Grating

Swage-locked aluminum grating is manufactured with either an “I” or rectangular bearing bar. These bars are permanently locked to the cross rods with a swaging process which reshapes the rods. Because of the flange width, I-bars reduce the open spaces of the grating yet I-bar swage-locked is lighter weight and less costly than a rectangular bar grating with the same bar thickness.

 

Swage-Locked I-Bar Grating is the most widely used and provides the strength equal to a rectangular bar of the same depth, but at far less weight and cost. The I-bars are permanently locked to the cross rods (positioned every 2" or 4") by a swaging process.

Swage-Locked Rectangular Bar Grating uses the swaging process to permanently lock the cross rods (positioned every 2" or 4") to the rectangular bars.

 

 

 

 


19-SI-4 (I-Bar)
Cross Rods 4" C/C


19-SI-2 (I-Bar)
Cross Rods 2" C/C

 

 

 


19-SR-4 (Rectangular)
Cross Rods 4" C/C


19-SR-2 (Rectangular)
Cross Rods 2" C/C

 

Download Submittal Page

Create a Customized Product Spec


 

 

 


Contact Us
    USGBC